Inhibitor INCO-C is designed to protect the gas production equipment from corrosion occurring due to the action of brines, corrosive gases (H2S, CO2), organic acids, and alcohols used in the fields. It exhibits a high protective effect at low concentrations of the inhibitor.

Pumping of the inhibitor in the well can be produced in different ways: periodically or continuously as in the form of a concentrate and dilute solutions of alcohols or hydrocarbons. The method of injection is chosen depending on the characteristics of the wells and technological capabilities. The best effect is manifested in the continuous introduction of the inhibitor.

In the application in the fields of methanol is most expedient to introduce an inhibitor as a solution in methanol to eliminate the negative effects of its application.

Basic physical and chemical characteristics of the inhibitor INCO-C

№	Characteristics	Value
1	Appearance	Liquid light-brown
2	Solubility in water in alcohols in hydrocarbons	insoluble soluble soluble
3	Density, g/cm3	0,85-0,95
4	Viscosity, mm2/s max	7
5	Pour point, °C not more	- 15
6	The protective effect in NACE standard medium at a concentration of inhibitor 50 mg/l in presence 20% of hydrocarbons, % not less	90

INCO-C corresponds to the specifications TU U 24.5-34841217-002:2008 and manufactured in accordance with technological instruction, duly approved, subject to the current Ukrainian state sanitary standards and regulations.

Producer NHI Service Ltd guarantees the quality of corrosion inhibitor INCO-C. Guarantee retention cycle and keeping time are 12 month from manufacturing date.

<< Back